DIN 2642 PN10 LOOSE FLANGE
FLANGE LAPPED
Ukuran Flange & Kira-kira Massa
| Flange standar Jerman DIN 2642 lapped flange;tekanan nominal 10 | |||||||||||
| Lose Flansche Vorschweißbördel Glatte Bunde DIN 2642 Nenndruck 10 | |||||||||||
| Tournantes Pengantin: nominal pression 10 | |||||||||||
| Pipa | Flange | Sekrup | Bobot | ||||||||
| Dirating | d1 | D | d6 | b | k | e | bolongan | Utas | d2 | Kg | |
| ISO | DIN | ||||||||||
| 15 | - | 20 | 95 | 22 | 14 | 65 | 3 | 4 | M 12 | 14 | 0,689 |
| 21,3 | - | 24 | |||||||||
| 20 | - | 25 | 105 | 28 | 14 | 75 | 3 | 4 | M 12 | 14 | 0,806 |
| 26,9 | - | 30 | |||||||||
| 25 | - | 30 | 115 | 33 | 16 | 85 | 4 | 4 | M 12 | 14 | 1,11 |
| 33,7 | - | 36 | |||||||||
| 32 | - | 38 | 140 | 42 | 16 | 100 | 4 | 4 | M 16 | 18 | 1,64 |
| 42,4 | - | 46 | |||||||||
| 40 | - | 44,5 | 150 | 50 | 16 | 110 | 4 | 4 | M 16 | 18 | 1,86 |
| 48,3 | - | 54 | |||||||||
| 50 | - | 57 | 165 | 62 | 16 | 125 | 5 | 4 | M 16 | 18 | 2,20 |
| 60,3 | - | 65 | |||||||||
| 65 | 76,1 | - | 185 | 81 | 16 | 145 | 5 | 4 | M 16 | 18 | 2,62 |
| 80 | 88,9 | - | 200 | 94 | 18 | 160 | 5 | 8 | M 16 | 18 | 3,32 |
| 100 | - | 108 | 220 | 113 | 18 | 180 | 5 | 8 | M 16 | 18 | 3,67 |
| 114,3 | - | 119 | |||||||||
| 125 | - | 133 | 250 | 138 | 18 | 210 | 5 | 8 | M 16 | 18 | 4,54 |
| 139,7 | - | 145 | |||||||||
| 150 | - | 159 | 285 | 164 | 18 | 240 | 5 | 8 | M 20 | 22 | 5,60 |
| 168,3 | - | 173 | |||||||||
| 200 | 219,1 | - | 340 | 225 | 20 | 295 | 5 | 8 | M 20 | 22 | 7,46 |
| 250 | - | 267 | 395 | 273 | 22 | 350 | 5 | 12 | M 20 | 22 | 10,30 |
| 273 | - | 279 | |||||||||
| 300 | 323,9 | - | 445 | 329 | 26 | 400 | 5 | 12 | M 20 | 22 | 14.00 |
| 350 | 355,6 | - | 505 | 362 | 28 | 460 | 6 | 16 | M 20 | 22 | 18,50 |
| - | 368 | 374 | |||||||||
| 400 | 406,4 | - | 565 | 413 | 32 | 515 | 6 | 16 | M 24 | 26 | 25.00 |
| - | 419 | 426 | |||||||||
| (450) | 457 | - | 615 | 467 | 38 | 565 | 6 | 20 | M 24 | 26 | 30,60 |
| 500 | 508 | - | 670 | 517 | 38 | 620 | 6 | 20 | M 24 | 26 | 37.00 |
| 600 | 610 | - | 780 | 618 | 44 | 725 | 7 | 20 | M 27 | 30 | 56,30 |
| 700 | 711 | - | 895 | 721 | 50 | 840 | 7 | 24 | M 27 | 30 | 80,40 |
| 800 | 813 | - | 1015 | 824 | 56 | 950 | 7 | 24 | M 30 | 33 | 113,20 |
CATETAN:
1. Ngadhepi miturut DIN 2526
pasuryan datar:
Formulir A, Wajah tanpa syarat
Formulir B, Wajah Rz=160, mesin (ora luwih alus tinimbang 40µm)
Pasuryan sing diangkat:
Formulir C, Wajah Rz=160, mesin (ora luwih alus tinimbang 40µm)
Formulir D, Pasuryan Rz=40, mesin
Formulir E, Pasuryan Rz=16, mesin
2. Basa lan alur miturut DIN 2512
Wangun F, Basa
Formulir N, Groove
3. Wong lanang lan wadon miturut DIN 2513, DIN 2514
Formulir V13, V14, Lanang
Formulir R13, R16, Wanita
4. Chemfering kanggo diaphragm-weld packing, PN64-PN400, miturut DIN 2695
5. Madhep kanggo joints berbentuk lensa, PN64-PN400, miturut DIN 2696
Kapasitas Produksi & Rincian Tuku
1. Supply Flange Dimensi DN15 – DN2000 (1/2″ – 80″), Forged Flange.
2. Bahan Baja Karbon: RST37.2, C22.8, S235JR, ST37, P235GH, P245GH, P250GH, ASTM A105
3. Bahan Stainless Steel: ASTM A182 F304, F304L, F316, F316L, F321 lsp.
4. Flange Anti Karat: Minyak Anti Karat, Cat Ireng, Lapisan Cat Kuning, Galvanis Panas Dicelup, Galvanis Dingin dll.
5. Output saben wulan: 3000 ton saben Sasi.
6. Katentuan Pangiriman: CIF, CFR, FOB, EXW.
7. Katentuan Pembayaran: Transfer Wire (T / T), L / C sing ora bisa dibatalake ing Sight dll.
8. Jumlah Pesenan Minimal: 1Ton utawa 100Pcs.
9. Jaminan Kualitas: Sertifikat EN10204 3.1, Sertifikat Pabrik, Inspeksi Pihak Katelu, Layanan Ganti Gratis.
10. Golek Requirements More Ing Flanges Market.